Bitwig Studio 3.3

admin 11/23/2021
86 Comments

So, I installed Ubuntu Studio 21.04, Bitwig 3.3.7 and DrivenByMoss 11.8.0. This time the dialogue box open to save/open a file (hurray), but the issue is it doesn't save anything. I make assignments, click 'save' choose a name and press save. However, it doesn't write anything to my home folder, so all assignments are lost. Can you please help? Year of release: Version: 3.3.5 Developer: Bitwig Developer site: bitwig Platform: Intel only Interface language: English Tablet: cured (put and work) MORiA System requirements: macOS 10.13 High Sierra or above a CPU capable of SSE 4.1 Description: Bitwig Studio is a new look at the process of creating and performing electronic music in the studio Read More ». Bitwig is notable for its strong modulation, and automation capabilities. The current stable version of Bitwig is 'Bitwig Studio 3.3'. The latest major release, Bitwig Studio 3.0, was released on 10 July 2019.

Just as real instruments offer expression without distraction, Bitwig Studio 3.3 aims to extend and focus the musician's workflow. For professional sound design, a hybrid modular synthesizer. For permanent access to scenes and markers, a new project Sections page. For cleaner editing, free content scaling and transient-preserving behaviors. Oh, and a world of wavetable.

  1. Year / Release Date: Version: 3.3.1 Developer: Bitwig Developer site: www.bitwig.com Bit depth: 64bit Interface language: English Tabletka: present System requirements: Windows – Windows 7, 8, 10 (64-bit). Mac – MacOS 10.11 (“El Capitan”) or higher. Linux – Ubuntu 17.04 or higher. Description: Bitwig Studio inspires you to take more control over your music by giving.
  2. When Bitwig introduced the Polymer synthesizer in Bitwig Studio 3.3 late last year, it accomplished several objectives. Firstly, it provided a simple but versatile way to quickly dial up a wealth of high-quality synth sounds. Polymer lets you mix and match many oscillator, filter and amp envelope.

Polymer starts simple: pick an oscillator, a filter, and an envelope generator. Swapping out Grid modules within a dedicated synthesizer is both fast and quick, helping you craft production-worthy sounds from minimal controls immediately.

Beside the three modules are a streamlined set of support parameters, providing ease of control and playability. And from this deceptively small package, a bouquet of synthesis is available: subtractive, FM/PM, hard sync, PWM, phase distortion, and now wavetable (more on that below).

Of course, Polymer lives within Bitwig Studio and its open modular philosophy. Add a modulator to make any parameter move. Turn on Voice Stacking to layer a sound with unique variations. Group any Polymer, and add another synth or plug-in beside it. Even right-click Polymer to convert it to Poly Grid if you need full control.

Accompanying the update and as a hands-on introduction to our new synthesizer Polymer, we’ve designed the Polymerics sound package. And since a wavetable synth and module needs, um, wavetables, we've also created an additional Wavetable utility package.

This package explores the vast sonic terrain opened by our straightforward and fun synthesizer, Polymer.

Carefully crafted wavetables in five categories: real-world Acoustic instruments, various Analog and Digital synthesis techniques, recursive Fractal spectra, and various series of Harmonics.

15.7 MB

Start up Bitwig Studio 3.3 and download the Wavetables and Polymerics packages from the Package Manager, find the range of each preset with its friendly Remote Controls, and discover your new favorite sounds.

The new Wavetable module brings another method of synthesis, and does it Bitwig-style. True to The Grid, this oscillator can be read by stereo control signals, accessing different parts of a wavetable at once. It offers three unique unison modes for making a small universe out of each note played. And it looks good, both in The Grid and Polymer.

Since a wavetable synth needs, um, wavetables, we've created and cleaned up 139 of those in five categories. Plus any WT file can be read directly, and Serum- and WaveEdit-compatible WAV files can be imported. And browsing is a visual joy.

And don't forget the new Vibrato modulator. This musical LFO is controlled by mod wheel by default, but can also be switched to poly pressure or manual control. Another five clicks saved every time. Use them on sound instead.

Finally, since you sometimes just want to push through a wavetable, a new Ramp modulator has joined the team. Just set the time, curve, and direction. Something so simple and predictable (and with a looping option) will likely find a place in many of your sounds.

Some editing and workflow features have come along for 3.3 as well.

Free Content Scaling. Whatever is selected in the timeline can now be stretched directly. Just select a bunch of notes, and then ALT-drag the right-hand boundary to scale them relative to the left edge (or vice versa). Same deal with audio events or clips or any time selection. Or type in a percentage, if you need precision.

Project Sections Page. The Project Panel has gained a new Sections page, which lists all of your Arranger cue markers and Launcher scenes side-by-side. So now there's a reserved space for scenes and markers, even when a huge mixer, Grid patch, or whatever takes over the screen.

Trim your clip, not your sound. Bitwig aims to preserve your transients. Version 3.3 extends this thinking to fades, allowing you to fade in from where your audio starts or to go back before it begins, automatically extending the clip and keeping the sound as edited. And adjusting crossfades, sliding edit boundaries, and adjusting gain only take one click now.

Modulation enhancements. While modulators could always control each other, any single modulation routing can now be scaled by a modulator. And each modulation routing now has various curves, either for shaping the signal or making it responsive across only part of a knob range.

And those devices. Since Arpeggiator can sequence pitches, a Skip Step option is a nice way to evolve those lines. As Polymer makes use of The Grid, it was a good time to add a Sub oscillator, a one-channel Pan knob, Octaver for octave offsets, and Velo Mult for velocity sensitivity. Because Wavetable is uniquely interesting in stereo, five Grid modules gained stereo processing options. And Micro-pitch got a new EDO mode, dividing any musical interval into a set number of pieces. (Yes, that happened.)

v3.3 is our 14th version of Bitwig Studio. Polymer is our 94th device, which includes the instruments, effects, and fancy containers that are part of Bitwig Studio. With Vibrato and Ramp joining the squad, there are now three dozen (that's 36) modulators for taking control of our devices or VST plug-ins. If you use The Grid for building or preset exploration, there are 175 Grid modules there. And if you think about it, Polymer's three slots provide 140 possible combinations (7 oscillators × 5 filters × 4 envelopes). Just from setting those three menus, and before you turn a single knob. #science

Bitwig

And by the way, you can read the Bitwig Studio 3.3 release notes by following this link...

Bitwig Studio 3.3 is available now. It is a free upgrade to everyone with an active Upgrade Plan for Bitwig Studio. Polymer and the new modulators (Vibrato and Ramp) are also part of Bitwig Studio 16-Track. View the full Bitwig feature comparison chart here...

Modern music production and performance for Windows, macOS, and Linux.

  • Linear and non-linear workflows for sound design, recording, live performance, and beyond
  • A complete package with 90+ instruments, effects, and other creative tools
  • Modular structure and flexibility in all aspects of the software
  • Enjoy over 10 GB (and counting) of world-class sound content from Bitwig and selected partners

Bitwig Studio is the single solution for realizing any musical idea across every stage of production.

Built on modern foundations, Bitwig Studio offers everything you can expect from a contemporary music creation system. And then some.

Modulation Heaven

The modulation system in Bitwig Studio allows you to use Macro controls, Note Expressions, LFOs, and Envelopes to modulate any device, VST plug-in, or hardware parameter. With 30+ modulators (and counting) the potential for creative expression is endless.

Hardware Integration

Hardware integration is a large part of what makes Bitwig Studio unique. MIDI handling, note timing, and latency compensation are aspects of this. Other prominent features include MIDI Clock Sync and Ableton LINK. But where Bitwig Studio really stands out is our collection of hardware integration devices.

Bitwig Studio 3.3

The Grid is a sound designer's dream. It can be a synth, an audio effect, or most things you can imagine. It's a modular sound design environment, open for you to build your own creations from scratch.

Learn More

Bitwig Studio 3.3 Tutorial

Meet Bitwig Studio's Sampler, featuring several playback modes, dynamic note-based modulations, and a powerful multisample editor.

Learn More

Try Bitwig Studio for free in demo mode, without time limitations. Save and export are disabled.
If you have a license, register it in your Bitwig account and activate Bitwig Studio using your login details.

Bitwig Studio 3.3 Professional

Bitwig Studio 3.3 (~230 MB)

There's one installer for all versions of Bitwig Studio. This includes the full version of Bitwig Studio, as well as 8-Track, and 16-Track.

Bitwig Studio 3.3

Bitwig studio 3.3 review

Bitwig Studio 3.3 Software

Jazz drummer Samuel Rohrer reflects on his musical journey and embrace of technology.