Having an ideal CPU or GPU temperature is really important for the smooth running of applications. Modern PC software might depend on more than one cores of your CPU to work properly. So overheating your CPU or GPU might cause malfunctioning. Therefore, you need the best temperature monitoring software to avoid any hardware malfunctioning.
- Computer Temperature Application
- Cpu Temperature Monitor Windows 10 Free
- Computer Temperature App Windows 10
- Computer Heat App
If you are looking for a fast way to check your CPU temp, it can be done quickly by downloading apps. There are apps to check CPU temp on both Windows and Mac devices. One of the most accessible ways to monitor the temperature of all your computer’s processors is with the Core Temp app. Follow these steps to check CPU temperature with Core Temp. Animated weather maps that include radar, temperature, satellite, cloud and radar forecast imagery. The free Windows 10 app is available for Windows 10 PC and Mobile, as well as Xbox One.
- Real Temp Real Temp is a temperature monitoring program designed for all Intel single Core, Dual Core, Quad Core and Core i7 processors. Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TJMax which is the safe maximum operating core temperature for the CPU.
- Anytime you’re in a fullscreen app, you can input your hotkeys to view your CPU temps. What temperature should my CPU be? Under typical circumstances, your CPU temp should remain between 40 and 65 degrees Celsius (or 104°F and 149°F).
- The best software to monitor CPU temp will often show GPU temperature, too. GPU stands short for Graphical Processing Unit. It is the graphical part of the PC in charge of the demanding tasks related to the computer’s graphics and what you see on the screen.
- 1 The Best CPU & GPU Temp Monitors to Install in Your PC
- 2 FAQs Related to Temp Monitor Programs
The Best CPU & GPU Temp Monitors to Install in Your PC
Here are some of the highly rated temp monitor applications for PC hardware.
1. CPU-Z The Best All-Time Hardware Monitor Tool
No doubt, CPU-Z is one of the best tools out there to monitor your hardware specs and temperature. We personally use this software for everyone who has zero knowledge of using monitoring software.
Not only it gives you the details about the current temperature of all cores on your CPU but also gives you other insights about your hardware. To monitor your GPU temperature, you have to install the “GPU-Z” version of this application.
2. HW Monitor The Easy to Use CPU & Graphics Card Temp Monitoring Application
One of the most ideal hardware monitoring tools out there. HW Monitor can measure the temperature and voltage of your PC. hardware. It can also give you a peek at the temperature of your video card and hard drive.
This temp monitoring software gives you a detailed insight into the overall health of your machine. If you buy the Pro version of this software, you will get access to 10 remote connections.
We highly recommend this hardware monitoring tool if you have a setup of servers or workstations. By installing the Pro version, you can remotely access this software and keep an eye on your hardware.
3. Core Temp Real-time Monitoring For Intel & AMD CPUs
If you really want a quick insight into your CPU cores, then this application makes up a great deal. There are very programs like these that give you insight into the minimum and maximum temperature of your CPU in real-time.
This software access the data from the Digital Thermal Sensors of each CPU core for accurate temperature reading. You can also install different adds-on to view the temperature of your machine on your mobile phone.
The Core Temp software is compatible with Windows XP, Vista, 7, 8, 10, and Windows Server.
4. HWiNFO Temp Monitor Program for Detailed Insights on Hardware
If you are looking for software that gives you detailed information on your hardware’s temperature and health, then HWiNFO is for you. With this program, you can measure the temperature of the CPU, GPU, motherboard, disk drives, etc.
This software also gives you a notification in case there is an overheating issue related to specific hardware in your PC. This program is ideal for businesses or enterprises that need a real-time CPU or GPU monitoring application.
5. IDA64 Extreme Reliable App Monitoring Software
Only a few apps are able to monitor the voltage, power, and fan speeds apart from just giving you temperature readings. IDA64 Extreme is compatible with over 250 heat sensors that are used in almost every PC hardware available in the market.
We really liked their idea of displaying hardware insights on over 50 external screens. This means you can easily measure the performance of your hardware on tablets and smartphones as well. And this feature makes this program quite useful for enterprise users.
The program has a low price maintenance plan which makes it affordable for users who are tight on budget and don’t want to spend over $50 dollars for a temperature monitoring application.
6. Rainmeter Exact Temp Readings for CPU & GPU
Who wants to pay when you can access a free and open-source hardware monitoring application on the internet. Rainmeter gives you the correct temperature reading for the ram, disk drives, CPU, GPU, and network cards.
Computer Temperature Application
You can choose between different skins to perfectly match the display panel with your PC setup. Thanks to the drag and drop feature, you can easily customize the control panel of Rainmeter in a go.
If you are a non-technical person and need the best temperature monitoring tool for your hardware, get the Rainmeter. It’s free to download and is compatible with Windows 7 and 10.
FAQs Related to Temp Monitor Programs
Why You Should Install Temp Monitor Application on your PC?
The best answer is to avoid overheating and preventing your hardware from blowing up. HWiNFO, HWMontior, IDA64 Xtreme are all reliable temperature monitoring software to measure your CPU & GPU performance. So installing these applications assures the optimal performance of your hardware.
How you can see temp on your desktop PC?
Windows do not have any pre-installed software to monitor your CPU or GPU temperature. So either have to restart your PC and check temps in BIOS or you must install a temperature measuring application.
What else can I do to keep the temperature of my CPU ideal?
The normal temperature of the CPU on idle mode is around 45 degrees. However, if you see your temperature rising up to 70 degrees, then you must install a good-quality CPU cooler.
Apart from this, make sure there is plenty of ventilation for the proper flow of air inside your PC case.
Real Temp is a temperature monitoring program designed for all Intel single Core, Dual Core, Quad Core and Core i7 processors.
Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TJMax which is the safe maximum operating core temperature for the CPU. As your CPU heats up, your Distance to TJMax will decrease. If it reaches zero, your processor will start to thermal throttle or slow down so maximizing your distance away from TJMax will help your computer run at full speed and more reliably too.
- Reads temperature information from all Intel Core based processors. Pentium 4 processors are not supported.
- Ability to individually calibrate Real Temp for each core of your CPU.
- Program is based on temperature data gathered using a Fluke 62 IR Thermometer.
- Test Sensors feature will check your DTS sensors for any sign of problems.
- Keeps track of Minimum and Maximum temperatures with full logging features.
- Reporting and logging of the Intel PROCHOT# thermal throttle activity bit.
- Quick, very accurate and repeatable benchmark.
- Displays MHz, TJMax, CPUID, APIC ID and Calibration settings.
- High temperature alarm and shutdown feature based on CPU or NVIDIA GPU temperature.
- No installation or registry modifications required.
- Support for Windows 2000 / XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit)
See the Installation & Calibration Page.
Cpu Temperature Monitor Windows 10 Free
DownloadsThe latest version is available in the downloads section.
Changes in Version 3.70
Computer Temperature App Windows 10
- Support for Sandy Bridge CPUs.
- VID based power consumption estimates for the newer CPUs.
- Improved log file formatting.
- Added a single system tray icon that reports the maximum core temperature.
- RealTemp GT updated for the 6 core Sandy Bridge E CPUs.
- i7 Turbo GT 1.30 multiplier monitoring tool.
Changes in Version 3.60
- Added Core i Turbo multiplier and Turbo TDP/TDC overclocking for Extreme / K series CPUs.
- Added ATI GPU and improved NVIDIA GPU monitoring with CrossFire and SLI support.
- Added a system tray / notification area font selector.
- New Fahrenheit and 3 digit system tray option.
- Fixed Core 2 Extreme multiplier reporting.
- Fixed Core 2 mobile CPU C0% based load reporting.
- Changed how Core 2 Super Low Frequency Mode (SLFM) is reported.
- Improved sensor test consistency.
- Bug with Reset button on ATI systems fixed.
- RealTemp GT for the 6 core Gulftown CPUs was also updated.
- Separate i7 Turbo GT multiplier monitoring tool for 6 core Gulftown CPUs added.
Changes in Version 3.40
- Core i7/i5/Xeon socket 1156 support including accurate turbo mode reporting.
- new information window for Nvidia GPUs with improved SLI support.
- correct reporting of Super Low Frequency Mode (SLFM) for Core 2 mobile CPUs.
- correct reporting of Intel Dynamic Acceleration (IDA) for Core 2 mobile CPUs.
- added VID reporting to the main GUI for Core 2 based CPUs.
- added a Fahrenheit=1 INI file option.
- added the option to view a Task Manager based or a C0% based load meter.
- added the ability to toggle C1E state and view the SpeedStep (EIST) state.
- improved dual and multi-monitor support including Anchor mode.
- includes RealTemp GT, a 6 core version of RealTemp for Gulftown CPUs.
- includes i7 Turbo, a high precision multiplier monitoring tool for all Core CPUs.
- and includes LoadTester, a variable load, single core testing program.
- Skull=1 or Skull=2 INI option for reading each CPU on a Dual Quad system.
- thanks rge, burebista and somebody on TPU for all of your ideas and help.
Changes in Version 3.00
- Core i7 temperature and frequency support including Turbo mode.
- NVIDIA temperature reporting with highest GPU temperature displayed in SLI mode.
- Ability to run a file or shutdown based on user defined alarm temperature.
- Updated interface with modern XP / Vista style and border in Mini Mode.
- Start Minimized Vista issues finally fixed.
- New RivaTuner plug-in support.
- Extra information on the main screen and the retirement of the toggle button.
- Switch to UNICODE for better international support.
- Adjustable GUI colors and bold System Tray font option.
- TJMax updated based on new Intel documentation and further testing.
- Calibration formula simplified.
- All new CPU Cool Down Test for a more thorough look at your sensors.
- Clock Modulation & Minimize on Close options.
- New CPU Load meter, log file headings and Distance to TJMax in the System Tray.
- 101 other improvements including initial Windows 7 Beta support.
Changes in Version 2.70
Computer Heat App
- Redesigned user interface (GUI) with larger temperature fonts.
- Added a movable Mini-Mode that is turned on and off with a double left mouse click on the GUI.
- Added an Anchor position so the GUI will move to a fixed screen position after a double right mouse click.
- Anchor position can be customized by holding down the Shift key while double right clicking.
- The correct physical core order of Quad core processors is now reported based on APIC ID.
- Added reporting of Minimum and Maximum VID as well as current VID.
- A new user selectable high temperature alarm with two alarms for Quad core processors.
- More accurate MHz calculation as well as FSB and CPU multiplier reporting.
- New program Up Time feature.
- Bug fix for log file output when using a Single or Dual core processor.
- Fixed and improved the Default button in the Settings window.
- Button labels and functionality changed in Settings window to follow the Windows style guide.
- Improved multi-threading and memory usage for better long term stability.
- Start Minimized option improved for better Vista support. See the documentation for more info.
- Option to save the Log file in .CSV format for easy Excel support.
- Gamer Mode temporarily retired.
Changes in Version 2.60
- Added a new Settings screen where all adjustments can be made in real time including TjMax.
- Temperatures of any core are now displayed in the System Tray area. Thanks W1zzard!
- 4 font options for the System Tray.
- Choice of Current, Minimum, Maximum or Average termperature displayed in the System Tray.
- Test Sensors feature improved to increase repeatability.
- CPU real time MHz calculation was re-worked for better SetFSB / ClockGen support.
- Calibration options now include one digit after the decimal point for finer adjustments.
- Experimental Gamer Mode introduced which allows core temperatures to be seen in some games.
Changes in Version 2.5
- Added minimize to System Tray support.
- Correctly reports CPU MHz for the new 45nm processors.
- Displays CPU voltage identification (VID).
- Start minimized option and now opens and closes in the same location.
Changes in Version 2.41
- adjustable Idle calibration for each core and expanded range from -3 to 3.
- adjustable TjMax for each core.
- log interval options expanded from 1 to 60 seconds.
- a change of timers used for the benchmark feature to better support overclocking from within Windows.
- Reset button added to the gui to reset minimum and maximum temperatures.
- better support of the Enter and Tab keys.