Hardware Temps

admin 11/23/2021

SolarWinds CPU Load Monitor EDITOR’S CHOICE. The SolarWinds CPU Load Monitor is part of the. SpeedFan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. SpeedFan can even access S.M.A.R.T. Info and show hard disk temperatures.SpeedFan supports SCSI disks too. SpeedFan can even change the FSB on some hardware (but this should be considered a bonus feature).

  1. Hardware Temperature App
  2. Monitor Hardware Temps

SysTool is an allround tweak and overclocking utility for enthusiasts.

Main Features

Hardware Temperature App

  • Motherboard Monitoring
  • ATI Video Card Overclocking
  • NVIDIA Video Card Overclocking
  • Enhanced Intel SpeedStep Control
  • AMD64 Cool&Quiet Control
  • HDD Acoustic Management
  • Changing chipset memory timings for i855/i848/i865/i875/i915/i925/i945/i955 and AMD64
  • Changing CPU FSB (includes ABIT uGuru).

SysTool will only work on Windows 2000/XP/2003 (64 bit versions are supported).

Hardware Temps

SysTool is no longer in active development and will not support the latest hardware.

Hardware Temps




Monitor Hardware Temps

SpeedFan monitor temperatures from several sources. By properly configuring SpeedFan, you canlet it change fan speeds based on system temperatures. When choosing parameters for the minimumand maximum fan speed, try to set them by hand (disable all the VARIATE FANs checkboxes) andlisten to the noise. When you hear no noise from the fan then you can set that value as theminimum fan speed for that fan. I suggest to use 100 as the maximum value, unless you hear alot of noise from it, in which case you might reduce the maximum speed to 95 or 90. You canset, say, 60 as the maximum value and, sometimes, I myself set it that way. Consider that whenthe WARNING temperature is reached, the program sets the fan speed to 100, whatever maximumspeed you selected. One last word should be said regarding the USE FAN x listbox. In my pc,more than one temperature changes when a fan runs faster. You can configure on which fan everytemperature should rely. On my system, TEMP1 and TEMP3 are both influenced by FAN1.