Nzxt Temp Monitor

admin 11/22/2021
  1. Nzxt Hue Software
  2. Nzxt Temp Monitoring
  3. Nzxt Gaming Monitor
  4. Nzxt Temp Monitor Manual

Checking your CPU temperature is as easy as firing up a monitoring program and using it to read out the value. Examples of these programs are HWMonitor, Core Temp, or NZXT's CAM. These three are. What are normal temperatures ranges for my CPU? Normal temperatures for your CPU are 30-45C when the computer is idle 50-80C when the computer is under load 90C+ means the computer is overheating. Just installed my 5800xt. Right now CAM software is not able to monitor CPU temperatures. It's reading 0 C. It looks like minimum temp to set a fan speed is 10C. So no fan control. Anyone else have this issue? Edit: NZXT released Beta version of CAM that monitors temperature properly.

  1. In idle i get 3 different temps. the lowest one from Ryzen Master shows 36-40 degrees celcius, while both HWiNFO and NZXT always shows about 5-10 degrees celcius more. Further more the Ryzen Master temp. Is pretty stable, where as the two other softwares keeps fluctating all of the time, jumping from 40 to 49 back down to 44 then to 50 ect.
  2. Touchscreen Monitor, EVICIV 7 Inch Portable USB Monitor Raspberry Pi Touch Screen IPS Display Computer Monitor 1024X600 16:9 Game Monitor for Pi 4/3 /2/ Zero/B Raspbian Ubuntu Xbox /PS4 Mac. I have my temp sensor shoved into the heat sink of my GPU, which gives me a pretty good temp reading during gaming (goes from around 25C at idle to.

Thermal shutdowns are triggered by a metric called “TjMax,” or Thermal Junction – Max Temperature. When a CPU or GPU begins hitting its maximum allowable temperature as measured by internal diodes, the component will dispatch a “distress” call and trigger a hard shutdown, immediately disabling the system and preventing further heat build-up. This is a good thing; it stops the temperatures from permanently damaging components and gives the system builder a bit of a chance for resolution.

There are a few main reasons for thermal shutdowns. Fan connectivity is the most common, but it’s also possible that heatsinks are improperly mounted, overclocks are too ambitious, or the case isn’t well ventilated for the components used.

What are the Symptoms of an Overheating PC?


Symptoms of thermal issues can be summed up as:

  • Decreased performance, even down to the Windows and input level. High temperatures will slowly degrade system performance until a point at which the system either shuts down or throttles its clocks.
  • Complete shutdown without warning, often after running some sort of semi-intensive program or software.
  • Clock-rates lower than they should be.

Troubleshooting an Overheating PC

We’d strongly recommend using CAM or something that can monitor temperatures like AIDA64 (free edition) for quick checking of your temperatures. The free version does not offer logging, but you won’t need it. You could also try HW Monitor+ or SpeedFan. Some CPUs will not correctly report their temperatures to the software – it just depends on the CPU and the software version used. You may have to try a few tools to get accurate readings. In general, almost all Intel CPUs read accurately into AIDA64, and all GPUs that we’ve tested (at GamersNexus, that is) report accurately to GPU-Z or AIDA64.

Nzxt Hue Software

Use these tools to monitor thermals while running your applications responsible for triggering shutdowns. Keep an eye on the temperature as things progress. If you see the CPU and/or GPU begin hitting ~80*C and continue climbing, it’s possible that there’s cause for concern.

Once you’ve seen enough data to feel confident that thermals are a problem (particularly if either component begins hitting 90*C – just shut it down), it’s time to troubleshoot connectivity issues.

Check the CPU power header on the motherboard. If that’s good, also check that the CPU pump (if using a liquid cooler) is connected appropriately. You can press lightly on the top of the CPU pump (while it’s on) to feel if the pump is working. If you feel a light vibration, then it’s good. If you feel significant heat in the tubes themselves, it’s probably not turning on.

The next item is BIOS. Hit ‘del’ to get into UEFI/BIOS and take a look at the reported CPU temperatures, then look at the fan speed settings. You can configure custom fan curves or settings here. If “silent” is presently selected, try opting for auto or max – just temporarily, for troubleshooting purposes – and see if temps get more reasonable. If they do, it’s possible that your case is choking air intake. This can be resolved with better case positioning in the room (is the fan butted against something?) or with more intake/exhaust fans.

Finally, we’d recommend checking that the coldplate is actually making contact with the CPU. If improperly installed, it is possible for the CPU cooler’s coldplate to hover above the CPU – doing nothing, effectively, as it is not a convection unit. Remount as necessary.

What if the GPU is Overheating?

GPU fan speeds can be controlled with CAM or another similar tool. Use one of these utilities to measure GPU temperatures and match them against your fan speed. It may be the case that you need to manually increase fan speeds to reduce overall system temperatures. – Steve Burke, GamersNexus

Real Temp is a temperature monitoring program designed for all Intel single Core, Dual Core, Quad Core and Core i7 processors.
Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TJMax which is the safe maximum operating core temperature for the CPU. As your CPU heats up, your Distance to TJMax will decrease. If it reaches zero, your processor will start to thermal throttle or slow down so maximizing your distance away from TJMax will help your computer run at full speed and more reliably too.

Main Features

Nzxt Temp Monitoring

  • Reads temperature information from all Intel Core based processors. Pentium 4 processors are not supported.
  • Ability to individually calibrate Real Temp for each core of your CPU.
  • Program is based on temperature data gathered using a Fluke 62 IR Thermometer.
  • Test Sensors feature will check your DTS sensors for any sign of problems.
  • Keeps track of Minimum and Maximum temperatures with full logging features.
  • Reporting and logging of the Intel PROCHOT# thermal throttle activity bit.
  • Quick, very accurate and repeatable benchmark.
  • Displays MHz, TJMax, CPUID, APIC ID and Calibration settings.
  • High temperature alarm and shutdown feature based on CPU or NVIDIA GPU temperature.
  • No installation or registry modifications required.
  • Support for Windows 2000 / XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit)




See the Installation & Calibration Page.


The latest version is available in the downloads section.Nzxt hardware monitor

Changes in Version 3.70

  • Support for Sandy Bridge CPUs.
  • VID based power consumption estimates for the newer CPUs.
  • Improved log file formatting.
  • Added a single system tray icon that reports the maximum core temperature.
  • RealTemp GT updated for the 6 core Sandy Bridge E CPUs.
  • i7 Turbo GT 1.30 multiplier monitoring tool.

Changes in Version 3.60

Nzxt Gaming Monitor

  • Added Core i Turbo multiplier and Turbo TDP/TDC overclocking for Extreme / K series CPUs.
  • Added ATI GPU and improved NVIDIA GPU monitoring with CrossFire and SLI support.
  • Added a system tray / notification area font selector.
  • New Fahrenheit and 3 digit system tray option.
  • Fixed Core 2 Extreme multiplier reporting.
  • Fixed Core 2 mobile CPU C0% based load reporting.
  • Changed how Core 2 Super Low Frequency Mode (SLFM) is reported.
  • Improved sensor test consistency.
  • Bug with Reset button on ATI systems fixed.
  • RealTemp GT for the 6 core Gulftown CPUs was also updated.
  • Separate i7 Turbo GT multiplier monitoring tool for 6 core Gulftown CPUs added.

Changes in Version 3.40

  • Core i7/i5/Xeon socket 1156 support including accurate turbo mode reporting.
  • new information window for Nvidia GPUs with improved SLI support.
  • correct reporting of Super Low Frequency Mode (SLFM) for Core 2 mobile CPUs.
  • correct reporting of Intel Dynamic Acceleration (IDA) for Core 2 mobile CPUs.
  • added VID reporting to the main GUI for Core 2 based CPUs.
  • added a Fahrenheit=1 INI file option.
  • added the option to view a Task Manager based or a C0% based load meter.
  • added the ability to toggle C1E state and view the SpeedStep (EIST) state.
  • improved dual and multi-monitor support including Anchor mode.
  • includes RealTemp GT, a 6 core version of RealTemp for Gulftown CPUs.
  • includes i7 Turbo, a high precision multiplier monitoring tool for all Core CPUs.
  • and includes LoadTester, a variable load, single core testing program.
  • Skull=1 or Skull=2 INI option for reading each CPU on a Dual Quad system.
  • thanks rge, burebista and somebody on TPU for all of your ideas and help.

Changes in Version 3.00

Nzxt Temp Monitor Manual

  • Core i7 temperature and frequency support including Turbo mode.
  • NVIDIA temperature reporting with highest GPU temperature displayed in SLI mode.
  • Ability to run a file or shutdown based on user defined alarm temperature.
  • Updated interface with modern XP / Vista style and border in Mini Mode.
  • Start Minimized Vista issues finally fixed.
  • New RivaTuner plug-in support.
  • Extra information on the main screen and the retirement of the toggle button.
  • Switch to UNICODE for better international support.
  • Adjustable GUI colors and bold System Tray font option.
  • TJMax updated based on new Intel documentation and further testing.
  • Calibration formula simplified.
  • All new CPU Cool Down Test for a more thorough look at your sensors.
  • Clock Modulation & Minimize on Close options.
  • New CPU Load meter, log file headings and Distance to TJMax in the System Tray.
  • 101 other improvements including initial Windows 7 Beta support.

Changes in Version 2.70

  • Redesigned user interface (GUI) with larger temperature fonts.
  • Added a movable Mini-Mode that is turned on and off with a double left mouse click on the GUI.
  • Added an Anchor position so the GUI will move to a fixed screen position after a double right mouse click.
  • Anchor position can be customized by holding down the Shift key while double right clicking.
  • The correct physical core order of Quad core processors is now reported based on APIC ID.
  • Added reporting of Minimum and Maximum VID as well as current VID.
  • A new user selectable high temperature alarm with two alarms for Quad core processors.
  • More accurate MHz calculation as well as FSB and CPU multiplier reporting.
  • New program Up Time feature.
  • Bug fix for log file output when using a Single or Dual core processor.
  • Fixed and improved the Default button in the Settings window.
  • Button labels and functionality changed in Settings window to follow the Windows style guide.
  • Improved multi-threading and memory usage for better long term stability.
  • Start Minimized option improved for better Vista support. See the documentation for more info.
  • Option to save the Log file in .CSV format for easy Excel support.
  • Gamer Mode temporarily retired.

Changes in Version 2.60

  • Added a new Settings screen where all adjustments can be made in real time including TjMax.
  • Temperatures of any core are now displayed in the System Tray area. Thanks W1zzard!
  • 4 font options for the System Tray.
  • Choice of Current, Minimum, Maximum or Average termperature displayed in the System Tray.
  • Test Sensors feature improved to increase repeatability.
  • CPU real time MHz calculation was re-worked for better SetFSB / ClockGen support.
  • Calibration options now include one digit after the decimal point for finer adjustments.
  • Experimental Gamer Mode introduced which allows core temperatures to be seen in some games.

Changes in Version 2.5

  • Added minimize to System Tray support.
  • Correctly reports CPU MHz for the new 45nm processors.
  • Displays CPU voltage identification (VID).
  • Start minimized option and now opens and closes in the same location.

Changes in Version 2.41

  • adjustable Idle calibration for each core and expanded range from -3 to 3.
  • adjustable TjMax for each core.
  • log interval options expanded from 1 to 60 seconds.
  • a change of timers used for the benchmark feature to better support overclocking from within Windows.
  • Reset button added to the gui to reset minimum and maximum temperatures.
  • better support of the Enter and Tab keys.