Don't let an infestation of black mold damage your home and health. With a few natural ingredients, you can eliminate the harmful substance without the help of a professional.
- Should I Remove It Alternative
- Should I Remove It Free
- Should I Remove It Cnet
- Should Remove It
- Epolife Should I Remove It
To remove corns from between your toes, crush a single aspirin, add a few drops of water, and let the paste sit on the corn for 5 to 10 minutes before rinsing it off. Then, use ice to treat any pain while the corn heals. You should also switch to more comfortable footwear so you don’t irritate your corns or get more of them. The Just Remove My Files option will take somewhere in the neighborhood of two hours, while the Fully Clean The Drive option can take as long as four hours. Of course, your mileage may vary.
As a naturally occurring and pervasive substance in our world, mold exists in a variety of different forms—many of which are non-toxic and mainly affect those with allergies and asthma.
Black mold, specifically, though, is a more serious offender. Exposure to the toxic variety of Stachybotrys chartarum can cause respiratory issues ranging from mild to severe. It, like most kinds of mold, grows at an alarming rate in the right conditions—namely in places with prolonged exposure to moisture and humidity, such as bathrooms, basements, under-sink cabinets, or recently flooded areas.
For this reason, homeowners should take action at first sign of it, and learn how to remove black mold before it transforms from a benign player to an invasive species.
Because black mold can form in the walls before spreading to drywall or other surfaces, chances are that homeowners may smell its musty, mildew odor before seeing it. When you do start your inspection, look for its characteristic slimy texture, dark green-black (sometimes gray) color, and spotty appearance.
If someone in your home has recently experienced an unshakable increase in respiratory symptoms (sniffling, sneezing, forgetfulness, congestion, and so on) and you suspect a recent mold infestation, you may be facing a more serious mold strain. Under such conditions, hire a licensed mold inspector to examine your house and advise on the best way to mitigate it based on its pervasiveness.
You should also hire a mold-removal specialist if the black mold has moved into your walls, in order to stop the problem before it spreads further. Otherwise, a mold problem confined to accessible, hard surfaces—such as bathroom walls, basement floors, or wood trim—can be tackled with the right gear and some persistence. Here’s how to remove black mold from your home.
First, locate the source of mold in your home. Black mold can be identified by its often-slimy texture, dark-greenish/black (sometimes gray) color, and growth that appears as spots or patches that spread over time. Common sources of black mold include corners, covered areas under sinks or cupboards, baseboards, under cardboard boxes in the basement, and anywhere else with high levels of moisture. Pay attention to your nose, and follow musty scent of black mold to locate the source. A flashlight will help you inspect nooks, crannies, and dark corners.
Once you’ve spotted the offending growth, whip up a mold-fighting solution. While plenty of agents can fight mold (Borax, vinegar, bleach, and ammonia, to name a few), tea tree oil and grapefruit seed extract are often considered the most effective products to disinfect and deodorize the problem area. Moreover, they’re completely non-toxic. You can purchase tea tree oil online and in health stores; just ensure that its from melaleuca alternifolia (an Australian tree) and that its active ingredients include 30 percent terpinen 4-ol and no more than 10 to 15 percent cineole. Grapefruit seed extract may be slightly less effective but easier to find, also available from these sorts of retailers.
For every one cup of water the spray bottle holds, add a teaspoon of either tea tree oil or grapefruit seed extract. Both of these essential oils have a long shelf life, so as long as the spray bottle can be turned to an “off” position for air-tightness, the solution will last for at least a year.
Before removing any black mold, gear up: Don disposable coveralls, rubber gloves, airtight safety goggles, and a face mask/respirator. This protective gear will reduce the risk of health issues that may result from exposure to the substance, including respiratory infections, allergic reactions, joint inflammation, and rashes. Because a single black mold spore hitting your eye can even induce blindness, you don’t want to cut any corners.
Thoroughly shake the spray bottle of mold-mitigating solution, then spray the affected area so it’s well-saturated. (Continue to shake the bottle repeatedly during this process in order to ensure the solution stays well mixed.) Allow the liquid to sit on the mold for 5 to 10 minutes so the antibacterial properties have time to work through the grime. Never scrape dried mold, or else the toxic spores could spread into air and cause negative health effects.
Take a nylon bristle brush and scrub the surface area to lift and unsettle the dampened mold. Move the brush in careful strong strokes so you aren’t splashing the mold on the surrounding areas—even dead mold spores can be an allergenic health issue. After scrubbing thoroughly with the brush, wipe the area clean with old rags or paper towels.
If the mold proves difficult to remove, repeat Steps 4 and 5. A light stain may remain after you’re through, but as long as you’ve cleaned the surface thoroughly, the mold should be properly killed.
Do not rinse the area with water, since the tea tree oil and grapefruit seed extracts are mold-fighting agents that help prevent mold’s return. Instead, shake the bottle of solution, give the mold-infested area a final light spray, and then allow it to air-dry.
Dispose of the coveralls and paper towel in a plastic bag, which you should tightly seal before taking out with the trash. Wash soiled rags and the nylon scrubber in hot water, or throw them away with the coveralls and paper towel as an extra precaution.
Remember, mold is naturally occurring. It may return. To tackle a few random spots of a fresh resurgence, it’s not necessary to don coveralls. Instead, grab a mask, goggles, gloves, and the leftover mold-killing solution, then proceed from Step 3 onward. Armed with this information on how to remove black mold, you’ll stay on top of the household menace in the future.
The new cancer hope is the garden-variety honeybee after Perth scientist Ciara Duffy found its venom kills aggressive breast cancer cells....
The new cancer hope is the garden-variety honeybee after Perth scientist Ciara Duffy found its venom kills aggressive breast cancer cells.
Research indicates the African tulip tree is fatal to native stingless bees.Source:News Regional Media
It’s a tree seen in backyards all over the east coast, and many Aussies would recognise its fiery bell-shaped blossoms.
But new research shows the flowers of the African tulip tree are killing native bees, leaving their dead bodies in its blooms, and potentially poisoning native bee larvae and hives. Experts now recommend people who can afford to remove the tree from their yards should do so.
The African tulip tree is a common sight throughout Queensland, NSW, the NT and on Christmas Island, and the introduced species is already considered a significant environmental weed across these states.
Courtney Irish, an entomologist and PhD candidate from the University of Queensland told news.com.au her research shows African tulip trees are killing native stingless bees and the species poses a significant ecological risk.
She recommends people consider removing them from their property to stop native bee death, and replace them with a native tree. Ms Irish is currently researching how exactly the tree kills native bees.
RELATED: Surprising animal you should really fear
African tulip trees are a common sight in several Australia states.Source:News Regional Media
Dead native bees can often be found stuck in the bell-shaped flowers.Source:Supplied
How do African tulip trees kill bees?
Ms Irish said there’s two main theories for why native bees are found dead in the flowers of African tulip trees.
“At the moment the predominant theory is the nectar of the plant is toxic to insects. That’s why people are cutting the trees down.
“There has been a bit of research done in other countries on other species, but we haven’t done enough research here in Australia – so that’s what we’re doing now,” she said.
Ms Irish said it can take up to 24 hours for the bees to die after ingesting the toxic nectar – which is a concern because they can spread poison to their hives.
“If there is something in the nectar that’s bad for the bees, they could bring it back to the hive, and that could be fed to the larvae, and that could affect the larval development,” Ms Irish said. “This could affect the survival rates and affect the entire hive.”
Her second theory is that the bees may be getting “stuck inside the flower”.
RELATED: Europe to ban bee-harming pesticides
An African tulip tree is removed by a NSW council in mid-March over bee concerns.Source:Facebook
“Bees need a particular cell structure inside the flowers to be able to climb out (of flowers). It could just be that they’re feeding on the nectar that pools at the bottom of the flower, they’re getting covered in nectar and getting really sticky, and they can’t rest to clean themselves off to be able to fly out again.
“It’s unusual that it takes such a long time for this toxin to kick in, but we’re still finding them dead inside the flowers.
“If they died a day later they might be coming back to the flower a day later and dying.
“But we’re still finding them dead inside the flower.”
Should you remove African tulip trees in your yard?
“They are an invasive pest … So even without the bee deaths it would be good to get rid of them,” Ms Irish said.
“There are limited resources that can go into conservation and you have to decide where to put those resources.
Should I Remove It Alternative
“Removing these trees is very difficult. It can be a very expensive process.
Should I Remove It Free
“If people are already removing trees, if they’re fronting those costs, absolutely that’s great,” she said.
Her recommendations are supported by Dr Tim Heard, the President of the Australian Native Bee Association and an entomologist and ex-CSIRO research scientist.
“The nectar and the pollen of this plant have been shown to increase mortality rates in insects that feed on those foods,” Dr Heard told news.com.au.
“It is primarily a bird pollinated food,” he added, pointing out bees can’t see the red colour of the flowers.
“However some insects do visit the plant – so even if they can’t see it, they can smell (the pollen) and they can get poisoned by the flower.
Should I Remove It Cnet
“What we do know is that they do kill native bees. You can see (dead) native bees in the flower,” Dr Heard added.
Should Remove It
He said it was important to remember there were other factors causing more significant impact to bees.
Compared to other threats faced by bees, he said he considered it a fairly minor threat.
Epolife Should I Remove It
Dr Heard said native bees faced a larger threat from habitat destruction caused by land clearing, insecticide use and climate change.